Mik-El

 

SERVICE - NEWS BULLETIN No 01BE010

Connection between different sources and Chilton M4/M48 modules

Since there has been some confusion about the difference between how to connect to the unbalanced M4 (and modified M48, called M48-2, see bulletin no. 94BE002) and the electronically balanced M48 modules, we will show you how to connect balanced and unbalanced equipment to the unbalanced M4/M48-2 modules and to the balanced M48 module. When using the unbalanced modules M4/M48-2 you will get 2 stereo inputs (one at each XLR-connector) and choose between them using the L1/L2 buttons (the SEL-button on the M48-2). When using the balanced M48 module you will get one stereo input (one channel on each XLR-connector) and the SEL-button is not in use.

1) Connection between different sources and Chilton M4/M48-2 modules

ALL CONNECTIONS WILL BE UNBALANCED

 

2) Connection between different sources and Chilton M48 module

Back to Service mainpage